Products

 Tapping Code Cards

Plastic Tapping Code Cards

A wide range of lift bags available.

2 x Divers hot water machines.

2 x Kinergentics Incorporated CMU 2 units plus remote controllers.

2 x Puma Divers LP compressors (DNV Classed).

COMING SOON

Divers Hat Cameras (Rated to 350m)
Divers Hat lights (Rated to 350m)
Panel mounted Comms Boxes
SRP Comms Boxes
Divers Tool Bags
DMAC Kits

TOOLING HIRE

Impact Guns, Grinders, Die Grinders, Concrete cutter, Weight coat cutters, Cold cutters, Jack Hammers.

Tools for Hire
BR45 Light to Medium Duty Breaker – 35-55# Class
Application: Light concrete breaking, small rock breaking, coral removal, rod driving, tamping.
Tool Bit Size: i in. hex Shank
Hyd. Flow: 7-9 gpm (26-34 lpm)
Weight: 50 lbs (22 kg)
Length: 25 in (65 cm)
Width: 14 in (36 cm)
Connection: 3/8 in NPT Hose Whips

 

Features
  • Feathering ON/OFF valve to control speed, making start-up and initial tool placement easy
  • Trouble-free diaphragm accumulator to provide added punch and reduced recoil
  • Will handle system back pressures up to 250 psi (17 bar).
  • Accepts standard 1 inch hex tool bits

BR67 Medium to Heavy Duty Breaker – 70# Class
Application: Concrete breaking, small rock breaking, rod driving, tamping
Tool Bit Size: 6 x 1-1/8 in. Hex Shank
Hyd. Flow: 7-9 gpm (26-34 lpm)
Weight: 67 lbs (30 kg)
Length: 27 in (68 cm)
Width: 16 in (41 cm)
Connection: 3/8 in NPT Hose Whips

 

Features
  • Feathering ON/OFF valve to control speed, making start-up and initial tool placement easy
  • Trouble-free diaphragm accumulator to provide added punch and reduced recoil
  • Will handle system back pressures up to 250 psi (17 bar).
  • Accepts standard 1-1/8 inch hex tool bits

BR87 Heavy Duty Breaker – 90# Plus Class
Application: Concrete breaking or scoring, small rock breaking, rod driving, tamping
Tool Bit Size: 6 x 1-1/8 in. hex shank
Hyd. Flow: 7-9 gpm (26-34 lpm)
Weight: 83 lbs (37.7 kg)
Length: 29 in (73.5 cm)
Width: 16 in (41 cm)
Connection: 3/8 in NPT Hose Whips

 

Features
  • Feathering ON/OFF valve to control speed, making start-up and initial tool placement easy
  • Trouble-free diaphragm accumulator to provide added punch and reduced recoil
  • Will handle system back pressures up to 250 psi (17 bar).
  • Accepts standard 1-1/8 inch hex tool bits
DL07 Drill
Application: Drilling holes in wood, metal and masonry.
Capacity: 1/2 in. or 5/8 in. Chuck
Hyd. Flow: 3-10 gpm (11-38 lpm)
Weight: 6 lbs (2.7 kg)
Length: 9 in. (23 cm)
Width: 4 in. (10 cm)
Connection: 3/8 in. Adaptor to -8 SAE Port

 

Features
  • 1/2 inch or 5/8 inch keyed chuck
  • Dual position assist handle
  • Feathering trigger for speed control
  • Reversible, insulated handle
  • Trigger guard
  • Integral Hyrevz™ motor

ID07 Impact Drill/Wrench
Application: Nut and bolt tightening or loosening, lag bolt driving and wood drilling applications.
Hyd. Flow: 4-12 gpm (15-45 lpm)
Weight: 8 lbs (4 kg)
Length: 9 in. (23 cm)
Width: 5 in. (11 cm)
Connection: 3/8 in. Adaptor to -8 SAE Port

 

Features
  • Swing-hammer mechanism
  • Integral Hyrevz™ motor
  • 1/2 inch square drive chuck GR29
  • Over-sized reversing spool & heavy duty wiper seal
  • Trigger guard

IW12 Impact Wrench
Application: Nut and bolt tightening or loosening, anchor bolt driving.
Hyd. Flow: 4-12 gpm (15-45 lpm)
Weight: 14 lbs (6.4 kg)
Length: 9.5 in. (24 cm)
Width: 4 in. (10 cm)
Connection: 3/8 in. Adaptor to -8 SAE Port

 

Features
  • 3/4 inch square drive
  • Reversing valve
  • Adjustable impact intensity, from 250 to 1200 ft. lb. (340 to 1632 Nm)
  • Feathering trigger

IW16 Impact Wrench
Application: Nut and bolt tightening or loosening, anchor bolt driving
Hyd. Flow: 7-12 gpm (26-45 lpm)
Weight: 26 lbs (12 kg)
Length: 14.5 in. (37 cm)
Width: 4.5 in. (11 cm)
Connection: 3/8 in. Adaptor to -8 SAE Port

 

Features
  • Adjustable impact intensity,from 500 to 2500 ft. lb. (680 to 3400 Nm)
  • Feathering trigger and “D” handle
  • Reversing valve
  • 1 inch square drive

IW24 Impact Wrench
Application: Nut and bolt driving and screw anchor applications.
Hyd. Flow: 7-12 gpm (26-45 lpm)
Weight: 43 lbs (20 kg)
Length: 16.5 in. (41 cm)
Width: 5 in. (13 cm)
Connection: 3/8 in. Adaptor to -8 SAE Port

 

Features
  • 1-1/2 inch square drive
  • Large “D” handle and feathering trigger
  • 3/8 in. Flush Face Quick Disconnect Couplers.
  • Impact intensity, from 800 to 3500 ft. lbs. (1088 to 4760 Nm)
  • Integral Hyrevz™ motor
  • Reversing valve

HD45 Hammer Drill
Application: Drilling holes in concrete, rock, or masonry.
Capacity: #736 Skil Hex
Hyd. Flow: 7-9 gpm (26-34 lpm)
Weight: 45 lbs (20 kg)
Length: 22 in. (57 cm)
Width: 14 in. (35 cm)
Connection: 3/8 in. NPT Hose Whips

 

Features
  • Drills holes in concrete, rock, or masonry from 3/4 in. (19 mm) to 2 in. (50 mm) in diameter and up to 29 in. (73.7 cm) deep as well as core drilling up to 4 in. (102 mm) in diameter.
  • Uses standard Skil 736 shank, carbide tipped, ? uted drill bits and requires no ? uid to clear holes during operation.
  • Feathering trigger for easy starts
  • Adjustable rotation speed (both forward and reverse)
  • Hose whips and ? ush face quick disconnect couplers.

SK58 Sinker Drill
Application: Heavy duty utility construction, blast hole drilling, leak detection for gas utilities and dowel drilling.
Capacity: 7/8 x 4-1/4 in. or 1 x 4-1/4 in. Hex Shank Steels (see ordering info)
Hyd. Flow: 7-9 gpm (26-34 lpm)
Weight: 67 lbs (30 kg)
Length: 26 in. (66 cm)
Width: 18 in. (46 cm)
Connection: 3/8 in. NPT Hose Whips

 

Features
  • Drills holes up to 3 inches (7.6 cm) in diameter and 20 feet (6 m) deep
  • Uses water ? ushing to clear holes of debris
  • Feathering trigger for easy starts
  • Direct drive rotation motor adjustable from 0 to 300 rpm
  • Hose whips and ? ush faced quick disconnect couplers
CO23 Cut-Off Saw
Application: Dimensional cutting of metal or masonry materials such as concrete, structural steel, and pipe.
Wheel Size: 10 in. Diameter Abrasive or Diamond Segmented
Hyd. Flow: 10-15 gpm (35-57 lpm)
Weight: 23 lbs (9.1 kg)
Length: 19 in (53.3 cm)
Width: 11 in (28 cm)
Connection: -8 SAE Threaded Ports

 

Features
  • Inter-locking safety trigger
  • Adjustable shoe,
  • 10 inch wheel capacity and 1 inch arbor
  • Integral gear motor with counter-clockwise rotation
  • Furnished with hose whips

CS06 Chain Saw
Application: Wood Cutting – Trees, Timbers, Wood Structures
Capacity: 15 & 18 in. (30 & 46 cm) Bars (see order info)
Hyd. Flow: 7-9 gpm (26-34 lpm)
Weight: 6.25 lbs (2.8 kg)
Length: 14 in. (36 cm) (less bar)
Width: 9 in. (23 cm)
Connection: 3/8 in NPT Hose Whips

 

Features
  • Iinter-locking trigger
  • Hyrevz™ motor
  • Low kickback bars and chains
  • Hand guard
  • Dual spool for Open Center or Closed Center operation

CS11 Chain Saw
Application: Extreme duty applications such as bridge pilings and utility poles.
Capacity: 24, 30, 36 in. (61, 76, 91 cm) (see order info)
Hyd. Flow: 10-14 gpm (38-53 lpm)
Weight: 14 lbs (6 kg)
Length: 17 in. (43 cm)
Width: 9 in. (23 cm)
Connection: 3/8 in NPT Hose Whips

 

Features
  • Highest power-to-weight ration of any chain saw on the market
  • Interlocking triggers
  • Bucking spurs and hand guards

DS11 Diamond Chain Saw
Application: Cutting concrete, reinforced concrete, conduit, brick, stone and other masonry.
Capacity: 15 or 18 in. (33 or 46 cm) Bar
Hyd. Flow: 7-9 gpm (26-34 lpm)
Weight: 26 lbs (11 kg)
Length: 38 in. (97 cm)
Width: 9 in. (23 cm)
Connection: 3/8 in NPT Hose Whips

 

Features
  • Plunge cut capability
  • Hyrevz™ motor
  • Water connection
  • Ergonomic handles and guards
  • The Wall Walker™ that provides leverage for cutting is standard equipment

Note: bar and chain are sold separately.

GR29 Grinder
Application: Metal grinding, buf? ng, polishing
Hyd. Flow: 4-10 gpm (15-38 lpm)
Weight: 14 lbs (6.4 kg)
Length: 9 in. (23 cm)
Width: 5 in. (11 cm)
Connection: 3/8 in. Adaptor to -8 SAE Port

 

Features
  • 5/8 in. – 11 Threaded Arbor
  • Assist Handle
  • Trigger guard
  • 2700 rpm @ 10gpm
  • Integral Hyrevz™ motor
CH15 Chipping Hammer
Application: Chipping concrete, rock, masonry or coral
Capacity: .580 in Hex x 2-1/2 in Shank Steel Bits
Hyd. Flow: 7-9 gpm (26-34 lpm)
Weight: 16 lbs (7.25 kg)
Length: 17 in (43 cm)
Width: 3 in (8 cm)
Connection: 3/8 in NPT Hose Whips

 

Features
  • Body of tool is shock and heat insulated
  • Tool steels are held in place by an adjustable chuck
  • Uses standard .580-inch hex, round collar, steel tool bits
  • Furnished with hose whips

CH15 Chipping Hammer
Application: Chipping light concrete, rock, masonry or coral
Capacity: .580 in Hex x 2-1/2 in Shank Steel Bits
Hyd. Flow: -9 gpm (26-34 lpm)
Weight: 24 lbs (11 kg)
Length: 20 in (51 cm)
Width: 3 in (8 cm)
Connection: 3/8 in NPT Hose Whips

 

Features
  • “D” handle and tool bit holder are shock and heat insulated
  • Tool steels are held in place by a slide that is detented for balls and springs
  • Uses standard .580-inch hex, round collar, steel tool bits
  • Furnished with hose whips
Product Description

Our hotwater suit has been developed over the past 20 years. The suit is based around a unique heavy anodized aluminium water distribution valve, with its unique 360 degree stainless steel quick connector.

The water flows along an anti-kink rubber pipe profile.

The pipes are held in place by a padded neoprene cover for comfort. All pipe runs are directed for comfort during those long bell runs.

The arms and legs can be trimmed to length and the pipe passed backwards through the ladder hole adjusters. There is the facility on the pipe, for the front chest and back neck, to take a hot water feed to the mask to heat the face plate.

The suit is supplied with a 1/4” inline double-barb plastic connector.
The shell body is constructed from high grade non-shrink neoprene with a high rubber solids content, lined on the outside with a durable Swiss pique canvas fabric.

  • Tested under the Balmoral UK platform, North Sea at 355 metres depth
  • Diver climate control system
  • Polymer reinforced knee and shin pads. This and the adjacent polymer reinforced embossing which circles the legs in the calf area is ideal for duct taping boots or socks to the suit.
  • Two deep pockets with drain holes and equipment attachment eyelets.
  • Suit closure is by a heavy-duty Vislon YKK zip
  • Wrap-over neoprene neck with fleece lining
  • Supplied with one ID badge which is secured to the suit with velcro. Spare tags are available on request.
  • Neoprene shoulder epaulettes – can be used as shoulder harness retainers which prevent your harness from slipping off your shoulders.
  • Light reflective strips on upper arms
  • Plastic embossed elbow area which continues round the arm, which is ideal for duct taping gloves to the suit. Wrist area has two pieces of diagonal velcro for glove attachment.
  • Anodised aluminium water distribution valve with 360° stainless steel swivel connector. When valve is not feeding the suit it dumps to the rear via control knob.
  • Featuring new flat pipe technology for additional comfort and a improved flow rate of 20%.
  • CE approved suit for use in excess of 50 metres depth

Neoprene Hot Water Suit boots

Made specifically for use with the Hotwater suit, Hotwater boots are manufactured from high quality 5mm neoprene. The high cut of the boot will ensure the hot water is trapped within the suit and the boot which will in turn keep the diver warm and comfortable.

Neoprene Hot Water Suit Gloves

Made specifically for use with the Hotwater suit, Hotwater Gloves are manufactured from high quality 5mm neoprene. The high cut of the glove will ensure the hot water is trapped within the suit and the glove which will in turn keep the divers hands warm and comfortable.

Product Description

Considered by divers as the ‘Ultimate’ dive Fins.

Fins are manufactured from a very high quality of rubber, using the latest manufacturing processes.

They have a great weight, are extremely robust and have been specifically designed for maximum endurance, exceptional propulsion and the ultimate finning power.

Originally developed for commercial use but due to their compact design, they are equally suited to wreck diving, cave dives and technical diver applications, where a shorter length dive fin is preferred.

For many years, these diving fins have been the preferred choice of most commercial, technical and deep divers, around the globe.

Please Note – The listed fin sizes are for wetboots or standard width drysuit boots. For wide fitting drysuit boots, please select one size higher than your drysuit boot size (up to a maximum of XXXL).

 

  • Manufactured From High Quality Rubber
  • Robust and Superb Endurance
  • Exceptional Finning Power
  • Available with Two Buckle Styles
  • Tested in Extreme Commercial Diving Conditions
  • Preferred Choice of Divers Around the Globe

High quality thermo rubber, mono constructed open water fins with high grip straps & rust resistant stainless steel shackles. Extremely tough & abrasion resistant long lasting fin, used by thousands of working divers worldwide.

 

Product Description

High quality certified lifting support for Soda Sorb buckets

Product Description

COVERALLS FOR DIVING ACTIVITIES

  • With self-adhesive flap over the zip.
  • Apertures on the shoulders (for Harness D rings) and the right body side (for Hot water suit block).
  • Two pockets on the legs, frontal.
  • Individual pouch.

FIELD OF APPLICATION

  • A piece of protective clothing, single use only, designed to protect the user against minor risks. For diving activities.

COMPLYING WITH CATEGORY 1 EUROPEAN PPE LEGISLATION.

Product Description

Divex Bell Survival Kit

The Divex Bell Survival Kits 1 & 2 are for use in
Diving Bells, Hyperbaric Lifeboats and
Underwater Welding Habitats in the event
of a ‘lost bell’ or emergency situation.

Skip to toolbar